Image is tested and it boots – the only problem is that you need to alter SPI bootscript – use those commands to boot: https://github.com/armbian/build/blob/master/config/bootscripts/boot-espressobin.cmd
… but you have to get there first.
Alternatively you can use DD to write image, but it does not check writings. SD card failing rate is higher than you can imagine. If you want to save yourself a lot of time: https://docs.armbian.com/User-Guide_Getting-Started/#how-to-prepare-a-sd-card
Armbian image has one single ext4 partition.
