3D Printed Case – Board not fitting

Home › Forums › Hardware discussions › 3D Printed Case – Board not fitting

Tagged: 

  • This topic is empty.
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 15, 2017 at 3:42 pm #496
    mrb1090
    Participant

    Had a case printed up using the CAD files provided on this site.

    Board doesn’t fit/sit properly in the case (tight/obstruction in right front corner).

    Has anyone else printed a case and have a similar problem?

    Best,

    Mike B.

    June 19, 2017 at 10:15 pm #515
    Bryan
    Keymaster

    Hi Mike,

    it is kind of tight especially with 3D prints. is it around the DC jack connection? can i ask which 3D printer you used?

    We did some prints with a few Makerbots and did have to remove alot of support structure to make it smooth fitting.

    Sincerely,

    Bryan

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Signup to our newsletter

Technical specification tables can not be displayed on mobile. Please view on desktop