Home Forums MOCHAbin Forum Software discussion Arch linux

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #50351
    mestrade
    Participant

    Installed successfully today.
    I used a M2 Sata where I installed the installation image following the arch linux install tutorial, then the boot kernel on an USB stick, but the existing one on the mmc should be ok.
    Then installed the OS on the internal mmc.
    Now it boot and it seems reliable. I will see how it behaves during the next few days.

    #50353
    tompusateri
    Participant

    Great to hear. I’m assuming you did this without EFI? I tried the latest Debian installer which has EFI and I couldn’t boot it.

    #50356
    mestrade
    Participant

    Yes, classic method with ext4load Image and dtd and using root on /dev/sda which is an M2 Sata.

    #50372
    technosf
    Participant

    You followed the ExpressoBin instructions? Uboot ‘n all?

    Any issues with packages, non-working drivers?

    Way-to-go @mestrade!

    #50434
    the-nozzle
    Participant

    @technosf – so I found 2 issues :
    – you have to blacklist mv88e6xxx – otherwise all of the ethernet ports vanish
    – usb3 read performance is really slow. Not sure why .
    – this is on 6.2.10-1-aarch64-ARCH

    .. if anyone had the same issue (and I don’t mean to hijack the thread) , i’d appreciate the help .

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.
Signup to our newsletter

Technical specification tables can not be displayed on mobile. Please view on desktop