Home Forums Hardware discussions board not booting

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1483
    clem_ent
    Participant

    Hi all,

    Little problem here : the board is not booting anymore.
    What i did :
    i booted my board normally, logged in and let it in idle mode.
    2 hours after, i unplugged it (jack power supply and USB cable), flashed my sdcard, re-insert the sd card into the board.
    First, when i plugged the USB cable, the green led didn’t switch on. It only did when i plugged the jack power supply.

    Then when opening the serial link, nothing happened.
    I checked the SD card on another espressobin, it worked.
    When plugging and unplugging the USB the FTDI is detected.

    But i cannot boot it.

    Can someone tell me if my board is dead ?

    Thanks

    #1484
    Anonymous
    Inactive

    Try this method: http://wiki.espressobin.net/tiki-index.php?page=Boot+ESPRESSObin+from+SATA+drive

    I managed to screw flash and this was the way to get back.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Signup to our newsletter

Technical specification tables can not be displayed on mobile. Please view on desktop