Home › Forums › Getting Started › Help booting the device – no boot prompt
This topic contains 1 reply, has 1 voice, and was last updated by ulab 3 months, 1 week ago.
I am trying to boot the espresso for the first time, I would like to use armbian.
At armbian page they say i need to choose flash latest u boot and that “You can obtain numbers from the current boot prompt.”
I setup minicom according to wiki, correct parameters, but when i plug in the powersource, nothing happens, nothing get displayed.
Is the correct working espresso supposed to display some information at a configured minicom terminal even without inserted sd card?
Or how can i simply find out, that it is really working, without building all toolchains and so on?
Thanks very much for any help…
Ok… it was my fault, I plugged the power adapter to an extension cord extender, that was switched off….. 😉
After switching on the extension cord, i got the normal Marvell>> boot prompt.
At least I have registered in the forum 🙂
You must be logged in to reply to this topic.
Technical specification tables can not be displayed on mobile. Please view on desktop