Opening the case

Home › Forums › MOCHAbin Forum › Getting Started › Opening the case

Tagged: 

Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 10, 2022 at 7:08 pm #50390
    technosf
    Participant

    Got my Mochabin, yay!

    I want to open the case – the plastic is a tight around the diecast – I do not want to split the plastic.

    Any directions on a non-destructive approach??

    TIA

    November 10, 2022 at 7:23 pm #50391
    technosf
    Participant

    To answer my own question: After removing the inset black screws, I lightly attached two of the smaller silver screws to the base and used those to pull the base while holding the plastic case steady. The base requires a little force to pull free as there is thermal paste attaching it to the CPU cover

    April 20, 2023 at 9:23 am #50414
    hokiku88
    Participant

    Great post

    April 23, 2023 at 7:21 am #50417
    hokiku88vip
    Participant

    Great post

  • Author
    Posts
Log In Register Lost Password
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Signup to our newsletter

Technical specification tables can not be displayed on mobile. Please view on desktop