Registered: 5 months, 1 week ago
Introduction to Panic Alarms
The aim of a panic alarm is to permit a person under duress to quickly and silently call for assist in the event of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it may be unsafe or uncomfortable to call for help in different ways. For example, if a belligerent person is standing in your foyer, it may be unwise to additional escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and convenient way to summon assist without drawing attention.
Silva Consultants feels that nearly every business can benefit from the usage of panic alarms. Locations the place panic alarms may be particularly useful embrace:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer service counters.
Check-out counters and cashier's stations.
Rooms where cash or different valuables are acquired, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Places the place confrontations with the general public are likely to occur.
Components of a Panic Alarm System
Panic alarms include two basic elements:
The panic button is the gadget that the particular person prompts when she or he needs help. There are numerous styles of panic buttons available. These can have a single pushbutton, two pushbuttons that should be pressed concurrently, gadgets that should be squeezed, and gadgets which are activated by a foot or knee. There are additionally devices that may be covertly activated when cash or a product is removed at the request of a robber. Most panic buttons are specifically designed to resist unintentional activation.
Panic buttons are usually installed in a location where they will easily be reached, yet out of view of the casual observer. In many cases, panic buttons are put in on the underside of a desk or counter-top.
Panic buttons might be the wired type or wireless type. Wired panic buttons are connected using cabling. Wired panic buttons are very reliable, but it can sometimes be difficult and costly to get cable to every panic button location.
Wireless panic buttons use a brief-range radio transmitter, similar to that used with a garage door opener. Wireless panic buttons are easy to put in and will be placed just about anywhere. Wireless panic buttons can be carried around on the premises by employees if desired. Wireless panic buttons require batteries and should be tested often to guarantee that they're working properly.
The communications system is the strategy that's used to summon assist when a panic button is pressed. The type of communications system used relies upon largely on the resources available on the facility where the panic alarm is being put in and the level of security threat.
Types of communications systems used can embody:
Communications to an off-site alarm monitoring middle:
This technique would typically be used at facilities that do not need an on-site security employees, similar to at a small business. The panic buttons can be linked to an alarm control panel which sends a signal to the monitoring center when a panic button is pressed. The alarm monitoring center would then call the police or other appropriate individuals to reply to the site.
Communications to security control middle:
Most giant corporations have some type of centralized security monitoring and control heart, either on-site, or at a central location somewhere within their organization. When this type of resource exists, panic buttons are typically monitored at the management center. Most frequently, panic buttons are connected to the group's access control and security management system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm within the security management center. The center would then dispatch local security officers and/or the police to answer the site.
Communications to non-security personnel:
Some organizations that would not have on-site security choose to notify non-security personnel when a panic button is pressed. Typically, the group will kind a "response team" consisting of staff from a number of departments (Facilities, HR, etc.) and ask that these workers respond when a panic button is pressed.
There are numerous systems that can be used to inform the response workforce when a panic button has been pressed. These embrace can embrace overhead paging systems and units that send voice messages, text messages, or email messages directly to smartphones.
If you liked this article and also you would like to collect more info relating to why invest in a silent alarm button i implore you to visit our own web page.
Topics Started: 0
Replies Created: 0
Forum Role: Participant
Technical specification tables can not be displayed on mobile. Please view on desktop